Jump to content

Sacred Plant Warrior

  • Content Count

  • Joined

  • Last visited

  • Days Won


Everything posted by Sacred Plant Warrior

  1. So, a couple veg section shots then re arranged after the Big Poppa was taken out. Man how beautiful these males can be. 28” tall w/pot 35” tall. No need to tip that taller branch growing into the light like it’s brother branch did a few days back. He’s with the 4 bbw big league grape ladies and I’m just going to have to watch Big Poppa so I catch him before he blows his load
  2. Only the largest branch had a sufficient root system imho. Will allow the other one to grow out more . biobizz coco w/perlite. Water 1st and then nutes to runoff .
  3. Black Friday wasn’t paid attention too and was hoping enough funds were available so as not to touch my emergency vet $. so, went to my favorite cannabis artist for my grabs. 1. Chloe Simone : https://en.seedfinder.eu/strain-info/Chloe_Simone/The_Bakery_Genetics/ 2. Tinglez : https://en.seedfinder.eu/strain-info/Tinklez/The_Bakery_Genetics/ 3. Milfberry Shortcake : https://en.seedfinder.eu/strain-info/Milfberry_Shortcake/The_Bakery_Genetics/ 4. Pink Frosted Donutz : https://en.seedfinder.eu/strain-info/Pink_Frosted_Donutz/The_Bakery_Genetics/ 5. Candy Applez : https://en.seedfinder.eu/strain-info/Candy_Applez/The_Bakery_Genetics/ 6. Unicorn Meat Pie : https://en.seedfinder.eu/strain-info/Unicorn_Meat_Pie/The_Bakery_Genetics/ these should be very tasty baked goods imho and all Bakery Genetics are tested prior to release. A huge reason why I deal with them.
  4. Ok folks, so we are without heat but checking the 4 girls in the basement they are doing ok. The branch repair leaves haven’t gone south and hope that branch recovers fully. gonna set the tent up by myself again = pita but worth it. Now, where to put the cloner is an issue. Might end up in the 1/2 closet i veg in usually. speaking of cloner I’m going to show what the two larger branches stuck in the cloner look like. They had a few sparse roots already before taking the plunge. Now, that I know I can do this so easily I will use this as a method to make mothers in the future as needed. 1. take branch and semi trim and place in water that’s been off gassed or spring water. Block light from the roots via plastic bag or whatever is free. 2. Let those root on full spectrum, standard fluorescent, CFL’s or metal Halide. Hps isn’t advisable 3. take the rooted branch and stick in a bubble cloner of any type. Watch the roots get profuse and transplant when the roots are how u want them. Done timing to put the male into 12-12 is now what I have to decide. And I’ll do a 2/3 week calculation to pollinate 1 ea of the BLG no.1 and no. 6 ! will Transplant these clones into biobizz coco coir. Will post the pics later today
  5. That’s too awesome frfr wow. Makes you not want to use it. Hangs in the bathroom as guest so = do not touch lol. Love the colors too.
  6. That country doesn’t exist outside tiny places nobody cares about and can’t profit from
  7. Did you see the strain Buck Fiden in the thread I started and in it’s lineange is Truck Fump :))) Ironically Trump didn’t get this type of feedback initially ! Hmm silly Sheeple Americans with a system they don’t know how to take advantage of legally and easily. Yet, they let the system take advantage of them. Oops
  8. Interesting and they all don’t have sinse enough to mention it’s water ph capable too. So, I checked on blue labs Aussie site. so, yeah I can see why u like it misterdirt and easy grab when u can do the business thing. as long as I’m still here and my water doesn’t change I can do without it easily but I sure do want one smdh ! Look what you gone and done misterdirt lol. If I get two nice harvests in next year I’ll buy one from donation expenses wink
  9. Oops the plant above with the bike wheel in ea is the same beastly girl. Wanted to give an idea of just how she looks. big oscillating fan was added tonight set on low and comes on with the light and small fan that points at the light. The xtra air will now stop leaf fainting(my word) from too much heat that doesn’t seem to affect surrounding leaves.
  10. Ok, all 4 girls are just starting to produce hairs Yippy. They were flipped Nov 11 and today Nov 21 is 10 days in flower by the clock. If ur were warmer in the basement with lights off I feel they would have flowered sooner like the original fem seed mothers. so, November 21 is first day of flower based on pistils showing. Yes, I will pay attention based on both time lines with the flip timeline coming to an end 1st. broke a branch on the sprawling beastly girl. I only noticed cause I saw branches that were too close to the floor. Fuk broken branch. Mix clone gel snd powder together slap some on and tap up so nothing moves. Only thing I used to do was tape up and they all repaired themselves workout anything added. Ijs they were all fed and last two were fed fresh nutes with the addition of molasses to the water. 4 Tbl CNS-17 and 2 tsp unsulphured grandmas molasses. Per 3 liters of water. Just increasing nutes has seemed to make the plants happier as I thought it would. Mainly because of how long they were in veg. The feed schedule is quite a bit shorter so bigger plants obviously need to eat more = duhhh I’ll get a better deal next time I buy some. 4 pics after repair is the same plant next 5 pics different plant next 5 pics different plant Seeds are in two separate plastic containers covered with black trash bag and one cfl pointing at it I monitor the cloner water and add cold water though I don’t need to by directions. So, all I do is get the water closer to 60 degrees which is the setup water temp meant to prevent stem curl.
  11. The rest and Jerry rigged dome just because of the larger branches. normally I have never used a dome with this cloner as it’s not needed. however, I think the unit might be a second but can’t recall the hole being like that and swore it had a more nozzle like opening. the bubbles only cover the two rows of the cloner well enough while other areas you don’t see bubbles or they are negligible. i will do what I had planned years ago. toss in a flat bubble stone to add more oxygen and speed up rooting. gotta find the missing pump that’s hiding. And if I can not I’ll buy a new one since they are cheap. If pump is found it can be used to power the smaller diy cloner never quite finished.
  12. Continue on more wasted root riot cubes no germination after extensive time and temp adjustments. seeds with seeet pepper seeds added for hormones. A few drops of CS in the water before and after adding seeet pepper seeds. the big boy was growing into the light literally so he was topped and cut out in the cloner. Put the last BLG water cut in the cloner. So all cuts are in the cloner now. all others are potted up except the one cut of BLG that’s living with rhe beautiful replacement male who will get topped today. the bigger routes branch make seems to be doing well. While the two BLG clones potted are still alive. The rattiest one doesn’t look too good but either she thrives or not.
  13. Folks introducing the weirdest clone sticks in a cloner most will ever see imho. Let’s see how this works out. sett up issues included leveling and that wasn’t easy because the pump is supposed to be totally submerged. setting initial water prep to 60 degrees was a pita but one and done.
  14. Ok, as you can see I prepped the big league grape cuts and they will test the cloner to dial it in. Off gassed tap water will be used because my ph is good and guessing ? My ppm is in a decent range as well. my thermometer is off by 8deg’s so needs to be adjusted via wrench . the cloner instructions want air to flow underneath it so that’s why aluminum pan. Can’t recall what I used years ago but will definitely find alternative options on the cheap:free. friidge cuts were turgid and temps won’t allow rooting . Obviously the other cuts started to root. Will see how or if putting one in the cloner will increase its roots proliferation or not.
  15. Well, the last drip drop is safe in the vault about to be riced up and head to the fridge the hard to see one is GTA aka Grand Theft Auto ! descriptions =
  16. Well, look what showed up yesterday. Now, gotta get 2 gals of spring water and un-sulphured molasses to use on this run for those Bigger BLG plants. GroClone celebrate. Need to clean and set up. Already have a dedicated portable table for it. by the time the tent is set up I might be seeing roots in the cloner. I will let them get more profuse then normal so they can have better growth. The good looking ones will be vegged and flowered in the tent with fresher beans that should germ normally.
  17. The rest of the gang = 4 boys of FPB’s various states. The main man wants to grow into the light so adjusted the twin towers so the smaller 3rd branch is still directly under the light. Yes, droopy male was fed. I’m guessing if the larger one roots and gets new growth, might give my friend that one. it will be a bigger plant; which will need to be defoliated so it does get too big. This gives her the chance to practice cloning. Both water cloning and basic style in a cup and small pot kiss style. 4 BLG clones 2 from root riot cubes potted up. the tiny one stuck in the pot with the boy w/cup dome for humidity and heat waiting to root just like the last one in water only container. bigger cuts in water waiting for a cloner run me thinks. Is the last picture now, the pita is to flower the boy too so he can make a few seeds. Yet, I don’t want him in the basement with the girls that long. In need of another flower area to move the boy too. So, will convert the closet with the shop light to 12/12 to let the boy finish flowering. Some will be saved once again. This will be the 3rd batch of pollen headed for the freezer of the same original male of Folsom Prison Blues. by then the tent should be set up and I can veg the rest under the LEDs dimmed to 1/2 power = 250 watts of 3500k lovin .at least that’s the plan of the chrome dome ha.
  18. Nov. 11, 21’ = 12-12 600 hps vertical setup chop date = sometime before February 14. might take down in two waves top half of the plants and then bottoms a week later. i’ve never done it before so we’ll see. as you can see the runt doesn’t look runty anymore. She’s turned into a pretty girl I must say. we’ll see when this cloner shows up, by Friday would be cool cause I have a birthday party to go to Saturday late afternoon. I’m going to leave the screen door open so they can put the box inside if they have sense. Hope it’s our regular and not the inept fill ins. so, two clones potted up are still alive and so is the cut stuck into the coco pot with the handsome replacement male ! fridge clones still might be salvageable and I’m sure I can get a couple off the bigger ones in water. They got a small shot of ferts just because diluted by majority water. was nice to turn off the led that lights up the bedroom window. Now, when it’s on again it will be in the tent. the last batch of seeds have done nothing even though they were moved to a warmer climate to germ. So, I’m going to choose some more recent seeds to make a run and use the cloner hopefully. will be using coco for them that run and more pots in the 4x4 maybe 12-16x 2gal pots/bags max. Need more bud to hold me down. should get a helper to put the tent up this time. His car will be back by the time I need him so we can get it done in 30 minutes or less.
  19. Options = Don’t forget unrooted clones are not plants and putting them in stasis can help in adjusting plant numbers with newer stuff. the other thing is the micro cloning which can keep mother genetics in a very tiny place with little light = can be hidden where plants would never be looked for. Ijs knocking up one lower branch van help you decide if the results are good enough to keep seeds of letting the mother go. any mom u never want to lose should be femminized once stress tested to preserve her indefinitely !
  20. Male FPB going to a sickle cell friend. She can knock up the Warriors Tonic and see what she gets. next sister BLG took forever but roots still. She’s in coco like her sister. then Big League Grape no.6 the largest cod the 4 plants was cleaned up and fed. Nutes were increased by 1Tbl so 4T /3 liter of water now.
  21. Thx dude, I’ll accept all positive vibes and point them toward the plants.
  22. Ok folks, as some may know my loot didn’t make it to it’s destination. Pissed since it was in a damn DVD’s case safe and sound. Grrr nevertheless the good brother who has been running the shop for years was kind enough to still let me make a couple selections. I was after Santeros Sanfune and others mentioned above previously. so, arrived and safe on the vault is @santero Snow Thrower , Island Sweet Skunk x East Coast Sour Diesel ! Originally created by Red Sky Walker from Canada and reproduced. and (Amnesia haze/Chocolate rain) x Blue Chem 5ea. Snow thrower is the kromes White cross I trust to be legit. I have another white cross from hazeman too and maybe yet another I might have forgotten. Hmm I guess getting the RSW repro’s with the ECSD is just coincidence not thought about at time of selection but nice to realize now that I think about it. the Amnesia x CR x blue Chem should be Interesting with the blue Chem taming some of the sativa genetics imho. almost forgot I dodged a bullet on getting these. = Safe and sound but dodged a serious fuck up by new mail lady. I looked at a piece of mail that was sorta weird. Then noticed it was the wrong address. So, told her and she came back for it. Then she peeped into her bag and said it’s this one … smdh I’m glad I caught her while she was still close. Well, time for rice and fridge storage
  23. U must start using ur bean stock ASAP. U already said clones are easy to get. Those beans aren’t. my frustration to try to germ my old beans is a pita but it has to be done. I’ve got plenty of fresher genetics that shouldn’t have germination issues. even now faced with trying to select more old beans to pop. I’m currently only trying to pop stuff that’s not as important to lock down a more consistent germination method to use on the highly valuable seeds in the vault. I’m going to move the beans put into cubes to the basement where it’s better heat near the furnace. Thankfully it’s not in the same area used to grow so temps are tried and tested in the basement.
  24. They sent my cloner to the wrong address and will supposedly pick it up Monday and then be on it’s way to me. wish I had checked email sooner as usual waited here just for the cloner that’s had a different tracking number than the one sent in my email notice. so I guess I should expect it by Friday next week at the latest. Yada yada
  • Create New...