Jump to content
  •     ai.php.gif instagramlogo.jpg

sannie

Plasma growing and flowering

Recommended Posts

After years of growing in my standard set-up with 2 x 600 watt it became time to do something completely different.

the former grow room is RIP and we build a brand new one

 

Let me introduce to you : Sannie's Pleasure dome :D

 

gallery_3_988_31020.jpg

 

The set up contains 2 secret jardin (dr80) tents,size = 80 x 80 x 160 cm

 

gallery_3_988_16027.jpg

 

As you can see we already put all the pipe's and stuff on there place.

A 20 cm that connects to 2 x 12,5 cm pipe

 

gallery_3_988_6046.jpg

 

These pipe's are going to a 1500 m3 box fan that is blowing in a 1500 m3 scrub,in this way i dont need any scrubs in the small tents and i am sure that it is as quite as possible.When all is on its place we closed it with panels so there is no visual growing here hahaha

 

gallery_3_988_3402.jpg

 

gallery_3_988_39645.jpg

 

The 2 tents are standing in a double bottom which prevent the light coming in but sure of getting in enough fresh air.

 

gallery_3_988_10121.jpg

 

On the bottom there are big hole's where the air can get in,for those hole's we putted special black filter stuff that prevent light is coming in.

 

gallery_3_988_54201.jpg

 

Then it was time for fun :D

hanging in the plasma's was not a easy task but we made a nice platform for the lamps to hang on (thanks to whazzup).The lamp contains 3 parts.The lamp and the magnetron are hanging in the tent,and the driver is outside the tent.

 

gallery_3_988_66164.jpg

 

gallery_3_988_25292.jpg

 

I decided to use 4 x 30 liter buckets which will provide me enough soil for each plant and be sure each plant will have enough soil to buffer.

 

gallery_3_988_42373.jpg

 

I am using the last half year light mix from KJ products and was realy satisfied about it, BUT i dont like the perlite that was used in there so doc made a special badge for sannie to see if this will fit the bill better :welcome:

 

gallery_3_988_81749.jpg

 

The standard recipe for sannie is mixing some fungie thru the soil and put in a buffer tablet in each 5 liter of soil,this has proven to be a real winner and i need to be sure in this set up that this part is coverd.

 

gallery_3_988_55338.jpg

 

Putted them around 20 cm in the soil cause these buckets are quite high

 

gallery_3_988_44553.jpg

 

Watering the buckets with plane water and some sannie's bacto

 

gallery_3_988_64438.jpg

 

I leave the buckets with a covered top for around a week to get some life started already in the soil

 

gallery_3_988_12127.jpg

 

I am waiting for the clones to get some roots and in the meanwhile i just put in some mothers and fathers that where standing outside,also some clone's in a propagator to suply myself some decent clones to work with.Also i am germing some seeds and all these just to see what these lights will do with my plants.

 

gallery_3_988_34438.jpg

 

There seems to be a fair bit of UV in these lights presence and i have been told that the plants should feel the same as in the high hymalaya's :D

Lets see how a sulphur plasma lamp will start :

 

gallery_3_988_88052.jpg

 

gallery_3_988_65278.jpg

 

gallery_3_988_73947.jpg

 

gallery_3_988_43602.jpg

 

gallery_3_988_81432.jpg

 

It has been fun so far and i hope the lamps will bring what we like to see :D

Cause these lamps are just to expensive at the moment this will be a grow journal without any intrest in selling these lamps,BUT we like to know what we can do with these lights and the only way to do this is by growing with it.

 

I want to thanks Gavita and Doc for giving me the opurtunity to work with these lamps.

A special thanks for Knutsel who helped me with building this pleasure dome.

 

Whazzup thanks for helping and maybe you can chim in with some hardcore info and graphics ?

 

As i said i am waiting for the clones to get roots and in the meanwhile i just have to wait and think things over which plant i want in there.For sure is that one tent is for making seeds and one dome is for smoking gear.

 

Stay tuned

 

greetz sannie :D

Share this post


Link to post
Share on other sites

Very much tuned sannie!!

 

good luck with 'm :welcome:

 

greets,

Hup

Share this post


Link to post
Share on other sites

I'll be making up the popcorn in just a few and I get the couch this time :welcome:

 

After watching the utube stuff, are you going to crank up the lamps to full on or are you going to let the plants get used to it in stages? I think they stopped equal to 1350 watts I think.

Share this post


Link to post
Share on other sites

Oh oh oh let me watch it.

What watts of sulphur plasma are you using ? They look small.

 

Cheers

Phuuu

Share this post


Link to post
Share on other sites

Its a 250 watt :welcome:

 

Oh oh oh let me watch it.

What watts of sulphur plasma are you using ? They look small.

 

Cheers

Phuuu

 

greetz sannie

Share this post


Link to post
Share on other sites

Congrats on setup and light Sannie! Pave the way for us neophytes.

 

Best Regards,

 

-O

Share this post


Link to post
Share on other sites

:welcome: ... check

:D ... check

:D ... check

 

Ok....I'm ready for the show.... :D

 

Peace...wpw

Share this post


Link to post
Share on other sites

Tickle my interest now why dont you? looks great sannie, I hope these lights work well for you.

Share this post


Link to post
Share on other sites

Nice man :welcome: I remember when there was a lot of talk about sulphur plasma a couple of years ago - never saw any grows with them and it kinda died out.

It's great to see something is happening there - would love to hear more specifics about the lamp.

This is gonna be an interesting watch for sure.

Share this post


Link to post
Share on other sites

Wonderfull, good luck with testing dude!

 

Great to have this first timer on opengrow...

 

Kees.

Share this post


Link to post
Share on other sites

for the tech savvies:

 

18.300 lumen, 5.300K colortemp with a CRI of 95, 0-100% in 30 seconds, re-fire in 60 seconds. Spectrum:

gallery_5211_7628_14848.jpg

(We have the lamp with the black line)

 

It's not an AGRI light btw, but as the spectrum is very wide (close to that of the sunlight) we experiment with growing under it. For greenhouses the HPS is more suitable as the blue light the plants get from the light outside is more than enough. Interesting thing is the high UV levels: please wear sunglasses using these as levels are very high, like in the high mountains of the himalaya. Normally these light will be used behind glass (that blocks UV radiation).

 

It is currently built in 3 pieces:

 

- power supply (28V, 9A)

- Microwave (driver)

- Emitter (microwave chamber with plasma cell)

 

gallery_5211_7628_18187.jpg

 

Q's? fire away!

Share this post


Link to post
Share on other sites
Q's? fire away!

Way to far over my head to fathom any questions right now

 

But Im down to watching these things grow some MJ!

 

Grats Sannie and best of luck!

Share this post


Link to post
Share on other sites

As promised some picture's from the mothers under the SP.

 

A over view from the plants that are stanidng in there for the moment,as you can see all the "older leave's are complete yellow and will fall off in time. The new shoots are real deep green and showing some adjustment issue's. :D

 

gallery_3_988_107865.jpg

 

I putted in also some seeds to see what a seedling will do when its born under this light :welcome:

 

gallery_3_988_80047.jpg

 

They are looking real nice

 

gallery_3_988_85867.jpg

 

You can see here a very tight internode building that is caused by the big part blue that is pressent in this lamp.

 

gallery_3_988_82928.jpg

 

We where a bit worried in the beginning but it is looking good now and while it is 30 C here at the moment it is 2 degrees warmer in the tent and that is not that bad for the moment :D

 

The clone's still dont show any signs of roots so is till have to wait before i can get realy started,but is a learning experience so far

 

greetz sannie

Share this post


Link to post
Share on other sites

Hi Sannie,

It's nice of you to share a new grow with us.

We were missing you in here.

Good luck with the new experiments.

 

Peace

 

The magician

Share this post


Link to post
Share on other sites

This topic is a wet dream for a techno grower :welcome:

Share this post


Link to post
Share on other sites

Today i have seen some small roots on the jackberry and the K.O Kush :welcome: :D :D :D

So i hope this weekend to get started with filling in the tents

 

greetz sannie

Share this post


Link to post
Share on other sites

It was time to fill in the tents with the clone's which i choose'd :

 

First i make small hole's in the soil and sprinkle some fungie around the roots to be sure i have a colony as soon as possible

 

gallery_3_988_87989.jpg

 

Nice rooted clone's

 

gallery_3_988_87496.jpg

 

The 4 jackberry's in the soil

 

gallery_3_988_69835.jpg

 

Soil covere'd with white foil to prevent the soil vaprorise to much and reflecting the light instead of absorbing it

 

gallery_3_988_10449.jpg

 

This sulphur plasma lamps are doing the same thing with youre clone's as the sun does when you put youre clone's outside when they are to small :

 

gallery_3_988_54136.jpg

 

Because of this i put some dome's over the plants to get them thru the first day's/week

The left side with the Jackberry:

 

gallery_3_988_65577.jpg

 

The right side with the K.O kushe's

 

gallery_3_988_81803.jpg

 

The plants are doing fine beside they are looking a bit yellow at the moment,but i am waiting till the roots will fill in the buckets and they can take care of the plant.Time will tell more

 

greetz sannie

Share this post


Link to post
Share on other sites

×
×
  • Create New...