Jump to content
  •     ai.php.gif instagramlogo.jpg

Recommended Posts

Well I lost my shit on the little ones! Got tired of flies so I took all plants and shaved root mass, dunked and repotted into fox farms ocean forest amended with earthworm castings, light warrior and lime. The babies are recovering better than I expected. I culled down to 18 with 16 for sure females and still waiting on one chuck d and the Bubba kush to sex. Got rid of the pure gooey as it went herm on me! So now I’m in a rush to get flower tent together. Got my light built just need to wire and finish control board. Once this is done the veg specimens will be ready to clone then move mothers to flower tent after roots show on clones. I’m pleased with the light. 4 chilled pucks v2 red and blue along with growmau5 far red pucks and rapidled’s exotic boards. All of these will be controlled individually with sonoff controls. The 2x4 flower tent is a limited edition blue camo gorilla tent with an ACInfinity 6” exhaust with digital controls hooked up to a 6” Can carbon filter with the intake air being filtered through a phresh 8” intake filter and another 6” customized secret jardin passive intake baffle . I’m going to run I think 8 in the flower tent in 3 gallon grow bags.  Gonna be fun—-G

pics are of two tallest so far  sensistar on left sssc pinetown durban right  (that might be the rare sativa pheno of sensistar)

57D4101E-6D96-4263-860D-34720B2DC88D.jpeg

B68FA393-CAC2-4A85-92B1-C2AE9A1FB9F8.jpeg

C6B9E7E9-A067-4AF8-B9A5-C3B6AF9CEB31.jpeg

B99159A0-E904-4821-94AF-CC69CB95D8A8.jpeg

AB40FBB0-94C3-487E-9AE7-1B83DA06C418.jpeg

E2A9864D-8C47-4618-A05B-6383817559AD.jpeg

  • Like 7

Share this post


Link to post
Share on other sites

Very nice and clean set up bro, can’t wait until I’m ready to build a permanent set up. 

  • Like 1
  • Thanks 1

Share this post


Link to post
Share on other sites

Very impressive great show 

  • Thanks 1

Share this post


Link to post
Share on other sites

Well plants are starting to rebound in new soil. Have not got to the flower tent yet. Life has other ideas for me atm. Gotta getbon it soon cant keep these in 5in pots forever. Pics of two Romulan S1’s and a weird sensistar sativa like pheno. 

B7E9A644-7A6B-47C4-ABFD-90B246129EC6.jpeg

31591AB8-572A-4BB6-9149-2509C13BF70E.jpeg

D949715A-2E46-4A79-8E47-9D7CD856E993.jpeg

  • Like 2

Share this post


Link to post
Share on other sites

Down to 16 with the blockhead still holding out on me. Just don’t feel comfortable yet chunking due to the strong grapefruit smell present. Plants are rebounding, soil is much better and no ph probs. Best of all no gnats!  These will all get cloned I believe and then best eight will go to flower. Still waiting on air pots to arrive and electrical work on light and control board. I’m impressed with these little hlg lights! I think the pucks and exotic boards are going to take them to a next level. Have a good evening—G

ABEDC60E-F1B9-4177-9087-6A5BFF82DFD3.jpeg

AF3C2CE6-5B3E-4D03-9E17-FA760B010543.jpeg

  • Like 8

Share this post


Link to post
Share on other sites
On 6/28/2019 at 7:19 AM, Griot said:

ACInfinity 6” exhaust with digital controls 

Hey Griot. How are you liking the fan so far? I need a new one and that has been on my radar.

  • Thanks 1

Share this post


Link to post
Share on other sites
2 hours ago, Shoeless said:

Hey Griot. How are you liking the fan so far? I need a new one and that has been on my radar.

Those are so cheap without the digital control 

 

couldn’t resist i pulled the trigger on a 4 “

cant tell you how she does still in the box but i tried playing with the fan speed controller. Anywhere bellow 85-90% its pretty quiet! Was happy to discover that!

cheers! 

  • Thanks 1

Share this post


Link to post
Share on other sites
3 hours ago, Shoeless said:

Hey Griot. How are you liking the fan so far? I need a new one and that has been on my radar.

I have not got the 6” out of the box yet but the 4” is working well. Just a little underpowered for my method of run. I should have got 2 sixes

  • Like 2

Share this post


Link to post
Share on other sites
16 hours ago, Griot said:

 I’m impressed with these little hlg lights! 

 

i can't  wait to try my 260w board

just got mine today

:tu

  • Like 2

Share this post


Link to post
Share on other sites

Down to 11, blockhead still not showing! 8 of these will go into flower tent once it’s ready in 3.6gallon air pots. All were cloned including those I had double females of before culling. Some like the Santa Maria in the pic look like they are in flower but they have been under 18/6 since sprouting. I would say they are mature! Everything bouncing back great from root trim and reporting in new amended soil. 

1E299EA4-DB3F-4BB8-B7A4-0A55307494DB.jpeg

944C21F1-281E-4615-B66A-74FF5F6AEFFE.jpeg

44D59814-987B-4F66-8AA6-59EFF44DD3E4.jpeg

  • Like 6

Share this post


Link to post
Share on other sites

Not sure this is ideal but it’s gonna happen anyhow. 8 -3.6gallon air pots in a 2x4x8 tent. 

7CF8DB56-BC5F-440E-838D-8C8A94B2C2CF.jpeg

  • Like 4

Share this post


Link to post
Share on other sites

So it looks like I will have one of each in the flower tent,

Blue Moon Magoo, Mother FireFly, Romulan S1, Old Widow S1, Santa Maria f8, Sensistar f3, Chuck D and  a SSSC Pinetown Durban f3. I held on to a Grape Earth f2 and Blockhead f5 male. You never know lol. Also ordered medium deluxe blumat kit to keep me off my knees lol. —G

  • Like 2

Share this post


Link to post
Share on other sites
15 hours ago, Griot said:

Not sure this is ideal but it’s gonna happen anyhow. 8 -3.6gallon air pots in a 2x4x8 tent. 

Sounds good! I let my 8 former mothers grow in the same tent with 16l pouch bags (the cheap ones).

Was a nice grow! Now in summer it would have been too much though I guess.

I'm quite curious about the Santa Maria and Romulan S1. The rest I don't know but SSSC Pinetown Durban f3 sounds good.

Wish you a nice run!

Luma

  • Like 1
  • Thanks 1

Share this post


Link to post
Share on other sites

Down to the final eight. Struggling with life issues atm and have not made headway on flower tent. Have lots of soldering to do to get control board up for the lights. First attempt at cloning and I’m 19 for 20. Used just aloe gel and rapid rooters got the win. Blumats are in at the post office, lots to do still. The old widow in the pic is the only one showing yellow tips on new growth and yellow fringe around some leaves. She is picky or rootbound I believe. Any suggestions welcome, thanks, G oh I just watered, they were a little dry in the pics

92159B32-CD28-43A8-9FB5-03E83A833B6F.jpeg

A5BC6BD2-BDB6-4E32-90D5-0F8E75C5DF9C.jpeg

F2F2EF29-3709-43DA-AFC0-0742A2FFD9B9.jpeg

  • Like 5

Share this post


Link to post
Share on other sites

These girls sure will appreciate a bigger pot 

great job :verrygood

  • Like 2

Share this post


Link to post
Share on other sites

New shoes  nice and shiny with room to breathe 

mans wiggle there toes so to speak 

their going to love the new home 

 

great job G 

paps 

  • Like 1

Share this post


Link to post
Share on other sites

All the clones took successfully. Just dipped in aloe leaf juice/gel and into rapid rooters. 12days later they are all in dirt. Thanks, G

1C8A6A51-8AD8-476A-A17F-09CBC66A2FD8.jpeg

  • Like 6

Share this post


Link to post
Share on other sites

6” acinfinity digital control going to 24” can filter. Gotta run it outside the tent for extra light travel. Anyone run carbon filters this way? I’ve read it’s fine to do but lots of challenges to that line of thinking on the net.

7FFA35ED-CDBA-4C9B-9A29-3460A0784C0B.jpeg

62AB8B43-2228-4318-AF26-19C55F5BF95E.jpeg

  • Like 1

Share this post


Link to post
Share on other sites

Hi. Bro works great my sit up has very little space only 60 inches high so it lives out side like yours 

peace 

paps 

 

  • Like 2

Share this post


Link to post
Share on other sites

I am the same ( limited height ) 

mine is set up similar , over two years now and all good 

my exhaust in-line is outside also , attached directly to filter ( less overall weight on your inner tent poles / frame )  

: )

  • Like 2

Share this post


Link to post
Share on other sites

Think I have it functionally sound. 6” carbon filter one side 8” intake other side. Fan top left corner over enough to hang light pulley with string straight. Blumat bucket about 3-4ft high. Time to start wiring lights and control panel!

603E32FA-4CEF-4622-B196-E006A1092E41.jpeg

7CF96079-0888-4D8E-8C6B-62CAB4C0289C.jpeg

E863D874-4AFC-41BE-B895-E7D9AA7164AA.jpeg

782B3345-5452-44DD-A9C9-DEF80D740474.jpeg

  • Like 1

Share this post


Link to post
Share on other sites

Chuck D. 

East Coast Sour Diesel x Deep Chunk

1113927A-9482-4951-B23B-967121D68AAD.jpeg

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...